Rapid Test For Streptococcus A

Screen Test Streptococcus A is a rapid test for self-diagnostic use for the qualitative detection of Group A Streptococcus antigen from throat swab specimens to aid in the early diagnosis of Group A Streptococcus infection.
The package contains 2 Strep A tests.
Screen Check Test Streptococcus A is a diagnostic medical device in vitro CE 0123.
Read the warnings and instructions for use carefully. Authorization dated 04/14/2021

How to use
Bring the product and extraction reagents to room temperature (10 ° C ~ 30 ° C) before to perform the test..
Add 4 drops of extraction reagent A and 4 drops of reagent B to the respective extraction tube and mix completely
Place the sample extraction swab in the tube.
Shake the swab ten times.
Leave the swab in the tube for one minute.
Then remove the swab while squeezing the swab head against the inside of the tube as you remove it to remove as much liquid as possible from the swab.
Discard the swab
Cap the tube and mix the contents by shaking gently.
The sample should be tested very quickly.
Remove the test from the sealed foil pouch by tearing where the mark is and place the test on a clean, dry, flat surface.
Add 3 drops of mixed liquid sample from the tube to the sample well (depicting an arrow) of the test cassette by inverting and squeezing the tube as shown.
Wait 10 minutes and read the results.
Do not read results after 15 minutes.

Format
Test
Desiccant Sachet
The desiccant is for storage purposes only, not is used during the testing procedure.
2 Extraction Tubes 0344 MDD 93/42/EEC
2 Sterile Throat Swabs. The swab is used to collect the sample.
Extraction reagents A and B (Warning: reagent B is toxic if ingested).
Instructions for use.