L'Espace Pediatrico Inhaler Spacer Yellow

L'espace

SPACER CHAMBER FOR INHALERS

Indications
Sealing chamber with valve that helps you use metered dose inhalers (MDIs). It allows to improve the effectiveness of drug administration at the pulmonary level by reducing side effects.

Dosage and Method instructions for use
1 - before use, carefully examine the product, checking that it is assembled correctly and that there are no foreign bodies or missing components. Remove any foreign body before use.
2- before use, read the instructions supplied with the MDI. Remove the cover from the MDI;
3- introduce the MDI into the bottom;
4- apply the mask to the face and make sure there is complete adhesion between the mask and the face. To prevent the mask from crushing, hold the device so as to support both the mask and the chamber with your hand;
5- press the MDI and inhale slowly through your mouth. Keep the mask pressed firmly on your face for at least 5 breaths after pressing the inhaler. During inhalation, air enters from the openings on the bottom which facilitates breathing. inhaling the nebulizer. The exhaled air exits through the exhalation valve;
6- wait 30 seconds before administering another dose of medicine (repeat steps 4-5), or as directed by the doctor. Administer only one puff of medicine at a time and follow the doctor's dosage instructions.

Features
The product does not contain latex.

Instructions relating to cleaning
If the device is always used by the same person, clean it as indicated. If the device is used by more than one people, after each use, in addition to cleaning, sterilization in an autoclave at 121°C for 15 minutes is also necessary. The device can be sterilized without compromising its functional characteristics up to 20 times, after which it can be sterilised. is need to be replaced. If deemed appropriate, for a thorough cleaning, it is It is possible to boil the device or wash it in the dishwasher.
A - the product should be cleaned following the following instructions before first use and then at least once a week: remove primer and mask;
B - leave the parts to bath for 15 minutes in warm water with a neutral detergent with a disinfectant action. Shake gently;
C - rinse in clean water;
D - shake to remove excess water as shown. Do not use dry cloths to dry parts of the device. Make sure the parts are dry before reassembling them;
And - put the bottom and mask back into place when the parts are completely dry and ready for use. Center the alignment arrow on the rear component with the alignment notch on the body as shown.

Warnings
Replace the product if there is a damaged component. Due to their size, some components could be swallowed by children. Do not leave these components unattended. And’ The presence of an adult is always necessary. Do not disassemble the product beyond what is indicated in the cleaning instructions. If you have any doubts about the use of the product, consult your doctor or pharmacist. Clean the product only as directed in these instructions to ensure effective operation.

Storage
When not in use, store the product in a clean container.
Replace the product after 24 months of continuous use.

Formats
- Yellow background: mask for children 2-6 years;
- orange background: mask for children 0- 2 years;
- magenta background: mask for adults.

Code 471352 / 471351 / 471386