Tenortho TO0304 Eclipse Universal Cervical Collar

Tenortho TO0304 Eclipse Universal Cervical Collar

Medical-orthopedic support ideal for stabilizing the cervical spine.
The semi-rigid structure is; made to be comfortable and well ventilated in order to ensure optimal immobilization and well-being for the patient.
The coating discs are initially modeled and this shape is maintained even after removing the product and its subsequent re -application facilitating patient recovery.
Furthermore, the foam coating minimizes pressure points, increasing patient comfort.

FEATURES
Semi-rigid structure made of a thermoplastic material .
The coating is; consisting of Nylon / polyester combined with a polyurethane foam.
Lateral closures that allow the adjustment of the orthosis.

INDICATIONS:
DISTORTIONS OF THE NECK COLUMN (WHIP)
TORCICOLLO
DYSCOPATHIES < br /> CEDIMENTS DUE TO CERVICAL ARTHROSIS METASTASIS
VERTIGINOUS CRISIS OF CERVICAL ORIGIN
POST-OPERATIVE
USEFUL IN CASE OF TRACHEOTOMY

APPLICATION
Preparation of the orthosis :
1. Remove the back panel using the buttons on the size disc. Raise the front frame. Repeat on the other side.
2. Loosen the back panel straps using the button located on the back of the bounty disc and slide this towards the end of the strap.
3. Press the buttons located on the front and choose the best position; appropriate.

Application:
1. With the patient lying down and the head in a neutral position, slide the back panel under the patient's neck. Center the back panel with the straps between the ear and the top of the shoulder.
2. Slide the front frame over the patient's neck to the desired position.
3. Holding the shell part, squeeze the buttons on the chin rest and gently lift to the desired neutral position so that the patient's chin rests on the foam liner.
4. Snap the size discs on the back panel into the openings on both sides of the front panel.
5. Hold the front frame of the chin guard with one hand and pull each strap forward to adjust the size until the back panel fits snugly against the back of the neck. The lengths of the strap should also be on both sides.

APPLICATION sitting position:

Orthosis preparation:
1. Remove the back panel using the buttons on the size disc. Raise the front frame. Repeat on the other side.
2. Loosen the back panel straps using the button located on the back of the bounty disc and slide this towards the end of the strap.
3. Press the buttons located on the front and choose the best position; appropriate.

Application:
1. With the patient seated and the head in a neutral position, slide the front part over the patient's neck. Attach the rear panel to the front frame by snapping the cut disc on the opposite side.
2. Holding the shell part, squeeze the buttons on the chin rest and gently lift to the desired neutral position so that the patient's chin rests on the foam liner.
3. Hold the front frame of the chin guard with one hand and pull each strap forward to adjust the size until the back panel fits snugly against the back of the neck. The lengths of the strap should also be on both sides.

MAINTENANCE
The semi-rigid part can Ò be cleaned with a damp cloth. The coating can Ò be hand washed in warm water (86 & deg; F / 30 & deg; C) with mild soap.
DRY AIR. Do not put the covers in the dryer and do not use other heat sources to dry. Contact your orthopedic technician if you have any problems or worn components that need to be replaced. Do not disperse in the environment.

PRECAUTIONS FOR USE
The device must not create pressure on parts of the body that have wounds, swelling or swelling. Contact the orthopedic technician if there are any doubts about the application. Do not wear the device near open flames.

WARNINGS
The device must be prescribed by the doctor and applied by an orthopedic technician, who is; the competent figure of reference both for the application and for the information for safe use. The application must be carried out with the utmost care, so to guarantee efficacy, tolerability; and correct operation. Any structural or other changes must be decided by the doctor and performed by the orthopedic technician. Personal use of the product is recommended. Direct contact of the device with the skin may cause redness or irritation to very sensitive persons. Contact your doctor immediately in case of intolerability.